THTInsertionFaultType Enumeration |
[This is preliminary documentation and is subject to change.]
Types of Through Hold Device Insertion Faults
Namespace: CFX.Structures.THTInsertion
Assembly: CFXnet46 (in CFXnet46.dll) Version: 1.0.5
SyntaxMembers| Member name | Value | Description | |
|---|---|---|---|
| XAxisError | 0 | Error in x motion axis | |
| YAxisError | 1 | Error in y motion axis | |
| ZAxisError | 2 | Error in z motion axis | |
| InsertionError | 3 | Part not inserted properly | |
| AlignmentError | 4 | Part cannot be properly aligned with PCB hole | |
| PickupError | 5 | Part could not be picked | |
| PartsExhaustedError | 6 | Material supply exhausted | |
| AnvilError | 7 | Anvil related problem | |
| ClinchError | 8 | Clinch related problem | |
| PanelLocationError | 9 | PCB not properly aligned in fixture / transport | |
| AirSupplyDown | 10 | Insufficient pressurized air supply |
See Also